whisker-blaster - Clean Blast International

Whisker Blaster

Innovative solutions are the key of Clean Blast Success. As there was a market Gap for a machine which needs to be light weight and can be carried easily on a difficult to reach areas, same time to achieve a cleanliness rate of SA 2½ or SA3 as per ISO 8501-1, whisker blaster was developed.

• Ideal machine were repairing is required on a small area/re-blasting or reworking on a specific location on the entire project.
• Working on Weld beams
• Provision for connecting a dust collector to make it dust free system.
• The dust generated is very minimal same time you will achieve a profile same like sandblasting.
• 2 Grades of Belt – Steel/Stainless Steel. Available in Sizes of 23mm & 12mm
• Will achieve SA 2½ or SA3 as per ISO 8501-1
• Abrasive cost , cost for Disposing of abrasive are no more. Hence improves Cost effectiveness
• As the size of the unit is small , transportation is very easy.
• Atex Certified:

Technical Specifications

	Flow Pressure (bar)	Speed (rpm)
No-load (not under load)	6	3000 ± 5%
No-load (not under load)	5	2700 ± 5%
With 23 mm Belt	6	2300 ± 5%
With 12 mm Belt	5	2300 ± 5%

Whisker Blaster

Flow Pressure (bar)

Speed (rpm)

No-load (not under load)

6

3000 ± 5%

No-load (not under load)

5

2700 ± 5%

With 23 mm Belt

6

2300 ± 5%

With 12 mm Belt

5

2300 ± 5%

Get in Touch

Get in Touch