CLEANBLAST™ IPC designed to produce a uniform layer of paint at remarkable speed and is easy to operate and maintain. Typical coating rates of 10 lineal feet per minute (3m/min) are obtained for most types of paint.Generally, any type of coating may be used in this tool that can be airless sprayed. To obtain the best possible production, one man should operate the paint Spray Gun while another man pulls the tool through the pipe or tubing.
The IPC-models have a spraying tip inside to give a controlled flow of paint material and that you can change in different size. Be sure to check with the coating manufacturer or supplier on the size spray tip to be used for applying the type of coating specified. Spray tip sizes used on IPC is normally lager than tip sizes used for Hand spraying applications. Improper spray tip may effect speed and paint thickness. All Pipe coaters are supplied with a standard tip.
Description | Art No |
CLEANBLAST™ Pipe Coater IPC 125 IPC-125 has a spraying head with diameter off 54mm and is designed for coating inner diameters of 3" until 5" (76mm – 125mm) | P73010 |
Description | Art No |
CLEANBLAST™ Pipe Coater IPC 300 IPC-300 has a spraying head with diameter off 69mm and is designed for coating inner diameters of 5" until 12" (125mm – 300mm) | P73020 |
Description | Art No |
CLEANBLAST™ Pipe Coater IPC 900 IPC-900 has a spraying head with diameter off 69mm and is designed for coating inner diameters of 12" until 35" (300mm – 900mm) | P73030 |
Description | Art No |
CLEANBLAST™ Pipe Coater IPC 300/900 IPC-300/900 has a spraying head with diameter off 69mm and is designed for coating inner diameters of 5" until 35" (125mm – 900mm) | P73060 |
Back
