1. Home
  2. /
  3. Products
  4. /
  5. Painting Equipments
  6. /
  7. Internal Pipe Coater
CLEANBLAST™ Internal Pipe Coater (IPC).
Manuals

CLEANBLAST™ IPC Pipe Coater is designed to coat the inside of pipe or tubing. The machine having a rotating head powered by an air motor, throws paint by centrifugal force at an evenly metered flow against the surface. The CLEANBLAST™ IPC Pipe Coater unit needs to be attached or coupled to airless painting machine of min 45:1 ratio and  is manually pulled through the pipe at a pre-determined speed based on paint film thickness and type of coating.  The paint will be pumped from an airless painting system though the paint hose and it gets atomized by the speed of the rotation head by centrifugal force and sprayed onto the internal wall of the pipe.

Learn more

CLEANBLAST™  IPC designed to produce a uniform layer of paint at remarkable speed and is easy to operate and maintain. Typical coating rates of 10 lineal feet per minute (3m/min) are obtained for most types of paint.Generally, any type of coating may be used in this tool that can be airless sprayed. To obtain the best possible production, one man should operate the paint Spray Gun while another man pulls the tool through the pipe or tubing.
The IPC-models have a spraying tip inside to give a controlled flow of paint material and that you can change in different size.  Be sure to check with the coating manufacturer or supplier on the size spray tip to be used for applying the type of coating specified.  Spray tip sizes used on IPC is normally lager than tip sizes used for Hand spraying applications. Improper spray tip may effect speed and paint thickness. All Pipe coaters are supplied with a standard tip.

Description

Art No

CLEANBLAST™ Pipe Coater IPC 125

IPC-125 has a spraying head with diameter off 54mm and is designed for coating inner diameters of 3" until 5" (76mm – 125mm)

P73010

Description

Art No

CLEANBLAST™ Pipe Coater IPC 300

IPC-300 has a spraying head with diameter off 69mm and is designed for coating inner diameters of 5" until 12" (125mm – 300mm)

P73020

Description

Art No

CLEANBLAST™ Pipe Coater IPC 900

IPC-900 has a spraying head with diameter off 69mm and is designed for coating inner diameters of 12" until 35" (300mm – 900mm)

P73030

Description

Art No

CLEANBLAST™ Pipe Coater IPC 300/900

IPC-300/900 has a spraying head with diameter off 69mm and is designed for coating inner diameters of 5" until 35" (125mm – 900mm)

P73060

Back

Get in Touch