WET BLASTER

Clean Blast Wet Blaster is an easy to use machine. Combination of technology of sandblasting with the high-pressure water jetting makes the WET Blaster superior to other methods of sandblasting.[show_more more=”Learn more” less=Back]

The WET Blaster is considered  to be environmentally friendly  as dust generated  is less and consumption of grit is very minimal. Hence less disposal cost. As dust generated  is less , multiple jobs can be carried out on the same area & cost associated with ventilation system to remove dust in the Air & curtain walls to isolate the area can be reduced which in terms helps in reducing the overall time & cost  required in completion of the job.[/show_more]

Features
Specification
Manuals
Video
  • Application
    • Surface cleaning of Steel.
    • Line Stripe Removal.
    • Restoration.
    • Automotive  Industry.
    • Offshore and Marine Industry.
  • Suitable Abrassive are Garnet, Aluminium Oxide and Glass Beads.

 

Model

 

Media

 

WB 500

 

Mix of abrasive & Water

 

WB 225

 

Mix of abrasive & Water

Capacity

5 Cubic Foot Capacity

2 Cubic Foot Capacity

Blast Time per Fill

Apprx 60 -. 90 minutes

Apprx. 45 – 60 minutes

Blast hose Dia

32 mm

25 mm

Hose Length

15 mtrs

15 mtrs

Nozzle Dia

10 mm

8 mm

Tank Dimension

55” H x 36” W x 40” D

55” H x 26” W x 34” D

Weight

134 Kg

225 Kg

Operating Pressure

30-150 PSI

30-150 PSI

Compressed Air Requirement

375 CFM

185 CFM

WET BLAST ATTACHEMENTS

Wet Blast Attachment type ‘WB’
Wet Blast attachment type ‘KWB’
Membrane pump unit, type C

Get in Touch